CONSTRUCTION OF A LANDFILL AND WASTE DUMP RESULTING FROM THE CONSTRUCTION OF THE NEW PRODUCTION SHAFT OF THE ČUKARU PEKI MINE IN BOR
DOI:
https://doi.org/10.30544/rudar15Keywords:
waste dumping, 3D model, Gems software, Minex softwareAbstract
During the mining works on the construction of the new production shaft of the Čukaru Peki mine in Bor, waste are excavated. This waste are temporarily deposited at the landfill in the immediate vicinity of the new production shaft. From the landfill, waste are loaded and transported to the waste dump where they are permanently disposed of. The construction of the landfill and waste dump site was carried out in the Gems software, in which a 3D model of these objects was constructed. Quantities were calculated in the Minex software.
References
Rajković, R., Kržanović, D., Mikić, M., Jovanović, M., & Milutinović, S. (2024). 3D modeli u funkciji projektovanja zemljanih radova. In Rudarstvo 2024: 15. simpozijum sa međunarodnim učešćem - Održivi razvoj u energetici i rudarstvu (pp. 196-201). Vrnjačka Banja, Srbija. ISBN 978-86-80420-12-7.
Rajković, R., Kržanović, D., Mikić, M., Jovanović, M., & Požega, E. (2022). Restoration of the landslide at "Landfill 3" in the zone of the Čukaru Peki flotation landfill. Mining and Metallurgy Engineering Bor, 2, 27-34.
Rajković, R., Obradović, L., Kržanović, D., & Mikić, M. (2014). Application of the software packages Gemcom and Minex for design of the waste landfill: An example of construction of Cassette III Phase 3 of ash and slag landfill of the thermal power plant Gacko. Mining and Metallurgy Engineering Bor, 4, 17-32.
Rajković, R., Kržanović, D., & Mikić, M. (2014). Construction of flotation tailings in Leposavić applying software package for 3D modeling in mining. Mining 2014 Vrnjačka Banja, 356-361. ISBN 978-86-80809-84-7.
Pavlović, M., Vušović, N., Maksimović, M., & Rajković, R. (2014). Basic principles of development and use of a digital geomodel for designing the open pit: The example of quartz and sandy clay deposit “Bošnjane”, Serbia. Mining and Metallurgy Engineering Bor, 2, 97-116.
Rajković, R., Kržanović, D., & Mikić, M. (2014). Construction of flotation tailings in Leposavić applying software package for 3D modeling in mining. Mining 2014 Vrnjačka Banja, 356-361. ISBN 978-86-80809-84-7.
Rajković, R., Kržanović, D., Mikić, M., & Marinković, V. (2013). Construction of ash and slag dump at the thermal power plant Gacko with software Gemcom 6.2 and Minex 5.2. In Mining 2013: Plans for development and improvement of mining (pp. 177-182). Veliko Gradište, Srebrno jezero, Serbia. ISBN 978-86-80809-78-6.
Rajković, R., Marinković, V., Mikić, M., & Kržanović, D. (2013). Development of 3D model of the southeastern waste dump. In Mining 2013: Plans for development and improvement of mining (pp. 224-226). Veliko Gradište, Srebrno jezero, Serbia. ISBN 978-86-80809-78-6.
Bugarin, M., Obradović, L., Rajković, R., Marinković, V., & Stevanović, Z. (2012). Trodimenzionalni model Oštreljskog planira u funkciji analize uticaja kiselih otpadnih voda na životnu sredinu. Projekat MNTR TR-37001 TR-1; Tehničko rešenje M84; Odluka Naučnog veća IRM Bor o prihvatanju rešenja br. X/7.1.
Rajković, R., Marinković, V., & Lekovski, R. (2011). Digital 3D terrain model. Mining Engineering, 3, 25-40. ISSN 1451-0162.
Rajković, R., Marinković, V., & Lekovski, R. (2011). 3D model of the waste dump Oštrelj in the software Gemcom 6. Mining Engineering, 3, 77-88. ISSN 1451-0162.
Ignjatović, M., Rajković, R., Marinković, V., & Ignjatović, D. (2010). Određivanje optimalne konture novoprojektovanog površinskog kopa pri eksploataciji uljnih škriljaca sa lokaliteta Aleksinačkog ležišta programom Minex 5.2.3. Projekat MNTR TR-17005 TR-2; Tehničko rešenje M83; IRM Bor br. 543/2.
Marinković, V., Rajković, R., Kržanović, D., Pačkovski, G., & Mitić, D. (2009). 2D and 3D models, similarity and differences. Bakar, 34(1), 1-9. ISSN 0351-0212.
